DEPCO Blog

DEPCO has added another high quality, customer focused cable manufacturer to its already outstanding line of cable and wire manufacturers:  Q S Technologies is based in Connecticut and is a vertically integrated manufacturer with an outstanding. modern manufacturing facility.

Q-S Technologies, Inc. designs and manufactures high performance electrical and electronic, custom wire and custom cable; specializing in custom application-specific products.

Using the following product platforms of multi-conductors, resistance wire, coaxial, optical fiber cables, heating cable, thermocouples, hook-up and lead wire, Q-S Technologies, Inc. can produce a solution for your most challenging application problem.

If you have a wire and cable problem, Q-S Technologies, Inc. will have the solution as well as full customer service and support.
Q-S Technologies, Inc. recognizes that these words are all too easy to write but are fully confident that you will greatly enjoy your Q-S Technologies, Inc. experience. It all begins with a human being answering the phone and from there you will recieve your quote within 24 hours and will be kept fully up-to-date during every step of your project. Totally refreshing…call Q-S at (203) 237-2297.  Or email at:  pmcdermott@q-stechnologies.com

DEPCO has partnered with Empire Screen Printing to add product identification, nameplates, domed decals, and other labelling products to its linecard.  Empire Screen is based in Onalaska, Wisconsin and has been manufacturing all sorts of high quality label pproduct for decades.  If you need low cost, high quality labels, this is the company to pick.

If you need high end, high quality, super duper snazzy label products, this is the place to look.  Samples are available for review in the Cleveland and Cincinnati offices.   Call 1-800-729-4208 or email to:  depco (at) depcosales.com for more.

The new compact enclosure air conditioner from Thermal Edge  has just received UL approval.  It is fully approved in the 120 Volt AC version and approval is in process for the 24 VDC model.  Thermal Edge is the only AC manufacturer who has this small design with controller, condensate system, and thermal expansion valve.  Incredibly, the unit fits on an 8 inch deep enclosure.  This compact design is new to the industry and quite the trend setter.

Contact Lisa Baker at lisa.baker@thermal-edge.com or 1-888-580-0202 for more information.

Air to air heat exchangers, based on the heat pipe, have recently been introduced by Thermal Edge Inc.  Heat pipes are more efficient and effective at eliminating enclosure overheating.  Thermal Edge Inc’s heat exchangers beat the competition by:

• Better sealing (closed loop)
• Thermostat is standard and included on all general purpose units
• Filterless Operation
• Full use of insulation to preserve the cold fraction
• Deliberate use of physical isolation of coil from casing where we want to transfer heat
• Deliberate use of contact between coil and casing for another increment of heat transfer to the outside environment
• Available in 120V, 230V, 24VDC and 48VDC
• Available in NEMA Type 12, 4 and 4X

Take a look at the specifications to see what configuration might work for your application.

Looking for an air conditioner that:  requires no maintenance?, no changing of filters?, can operate on DC or AC voltage?, has 1000 BTU + of cooling power?, can fit on an 8 inch enclosure?

Look no further than the CS010 from Thermal Edge Inc.  Currently undergoing UL certification testing in the Irving, TX, headquarters of TEI, the CS010 should be available for purchase and use in the next few weeks.  Contact Lisa Baker at the Thermal Edge factory for a specification sheet.  lisa.baker@thermal-edge.com or 1-888-580-0202

In addition to releasing its first new catalog in nearly 8 years, Sealcon USA has introduced a ton of new product– all of which have immediate applications.

Enclosures:  with all sorts of materials, sizes, and variations available, you are sure to find an enclosure that will work in your application.  Plastic?  EMI resistant?  Metal?  It’s all here.

Extra large fittings:  WADI-XL is designed to fit cables up to 3.54″ (90 mm) in O.D.

Explosion proof cable glands:  have a Euro-customer screaming for ATEX or Ex d/e ratings?  Look no further than the cable glands available from Sealcon.

HSK Diamond:  do you have applications where the cable gland will be exposed to the environment?  Sick and tired of replacing the product?  Sealcon now has the ZINC NICKEL Plated strain relief fitting.  Most applications can be handled by the standard nickel plated brass.  Stainless steel is always an option, but it is $$$$$$!  Zinc Nickel Plated product is somewhere in the middle pricing wise and offering a bit more in terms of durability.

Swivel Elbow Strain Relief:  have restricted space?  The swivel elbow strain relief could offer a solution.  Handy for confined spaces and it is available in PG11, 13, 16, and 21 as well as being rated IP68/NEMA6!

MTG Moltec announces the complete re-design and re-launch of its web site as well as a much more USA-friendly catalog.

The web site is live and running.  It features application information, PDF files which can be easily down loaded, English measurements versus metric, and more.

The catalog itself has been completely redesigned.  Completely in English to USA sizing requirements, the catalog is packed with info.  Application info, a fold out chart for conduit selection assistance, recommended conduit by application, and more.

Request your catalog by calling:  800-729-4208 or sending an e-mail to:  depco@depcosales.com

In further broadening its linecard, DEPCO has partnered with a major manufacturer of wire and cable, ICC Cable.

ICC Cable Corp. is your one stop total solution company for Energy Industry products and services.  We provide the highest quality cables and services, and have on-hand availability to fulfill your needs.

ICC Cable is focused on providing every customer with the most competitive pricing in the market, while ensuring that the highest standards of service and product quality/dependability are received. Every customer is given the highest level of service, from our long-term valued patrons, to  first-time customers. 

Whether you are considering utility cable, off shore cable, industrial cable (DLO, mining, specialty, or MV power cable). or wind power cable, consider ICC Cable before you make your purchasing decision.

DEPCO recently partnered with GenEx Cabling with multiple US locations to represent its products in Ohio, Indiana, Kentucky, West Virginia.  GenEx Cabling works only through distribution and does not sell directly to the end customer.  Genex Cabling Products is a major supplier of wire, cable, tubing and harnessing products. The primary goal is to supply its customers with quality wire and cable products at competitive prices. With an extensive product offering that includes audio, coax, computer, control, instrumentation, thermocouple, high temperature, and plenum cables. In addition, Genex offers a variety of tubing and harness wire management products. We regularly stock hundreds of SKU’s in our centrally located warehouse near Chicago where product is shipped within 24 hours after receipt of order.

Equally important is GenEx Cabling’s desire to service its customers beyond their expectations. In addition to an extremely fast turnaround time, GenEx specializes in cut-to-length orders from an extensive inventory.  With over 120 years of combined industry experience, the professional sales team at GenEx Cabling takes pride in serving its customers.

DEPCO is pleased to announce the addition of Horner Automation Products Group to its line card.  Horner APG is a leader in providing the all in one control products.  Horner has the largest selection anywhere of Operator Control Stations where I/O, PLC, HMI, and communication are truly all-in-one.

Horner APG specializes in the global automation market. Original equipment manufacturers (OEMs), integrators, and end-users are our customers…from various industries.everything from pharmaceutical companies to oil/gas, food, construction, and more. Our products include: Operator Control Stations (OCS…an all-in-one integrated controller); Conveyor Controllers for use with brushed and brushless rollers; Horner-brand products that can be used with GE Fanuc programmable controllers; and the TIU range of operator interface stations that support over 100 brands of programmable controllers, motion control products and drives.